M12 Connectors and Cable Systems
M12 connectors and cable systems provide a great deal of flexibility when compared to molded connector solutions. They are field-wireable and use an interference fit to keep the sleeve on the cable end plugged into the receptacle.
They also feature coding options that define pin geometry and arrangements to prevent mis-mating. This provides cross-manufacturer compatibility for a wide range of applications.
Panel mount
M12 connectors are used in a variety of applications, including industrial automated systems that link sensors and actuators. They can withstand extreme temperatures and environmental stresses, such as vibration, dust, and moisture. They are also available in a wide range of shapes and sizes, from straight and right-angle connectors to panel mount connectors.
A M12 bulkhead connector consists of a male plug and female receptacle. The connectors mate with each other using a coupling nut, which is screwed onto the cable end of the male plug and tightened against the receptacle end. The coupling nut can prevent the connector from being disconnected by a vibration or other external force.
The M12 connector system is standardized by a series of codes. The different codes correspond to the number and arrangement of pins in the connector. The coding is designed to make it difficult for users to mistakenly use the wrong type of connector. Moreover, the compact connector design makes it easy to install and maintain industrial equipment.
M12 connectors are also available in various configurations, including front panel mount and solder termination options. Some are prewired and can be connected to a cable. Others are able to withstand high voltages and currents and have a rugged, watertight seal. They are ideal for harsh environments, such as wash down applications and outdoor use.
Solder
If you’re looking for a waterproof connector that can hold up in harsh environments, M12 circular sensor connectors are a good choice. They’re designed m12 4 pin bulkhead connector to withstand power, signals and data transmission in industrial environments that are exposed to moisture, dust, chemicals, and vibration. They can also withstand the temperatures found in most factories, which makes them ideal for use in a wide range of applications.
These compact connectors have an insulating body that’s molded into the cable or panel side of the connector. They’re a great choice for sensors/actuators, field buses and device level connectivity in factory automation systems. They’re available in a variety of sizes, pin counts, and coding options.
Whether you’re designing a new machine or simply upgrading existing equipment, these M12 connectors can be easily installed in the field by soldering or securing them with vertical through holes. They’re also sealed to protect against the typical moisture found in many industrial processes, which is an important feature for high-demand equipment.
If you’re working with a new design, it’s important to carefully check the maximum temperature and power ratings for your equipment before installing an M12 connector. You can find the recommended ratings for each component on its datasheet, but it’s best to contact the manufacturer for more specifics. Using an online electronics search engine is an easy way to get the information you need for your project.
PCB mount
M12 connectors are a standardized circular connector product used in industrial automation and other harsh environment applications where compact, rugged, and reliable power, signal, and data connections are required. They are available in male and female jack and plug versions and can be ordered with different pin counts. They also have a variety of mounting options including through-hole, surface mount, and wave soldering. They can be purchased with or without shielding, and are available in a range of current ratings and voltage ratings.
Designed to handle bandwidth needs up to 10 Gb/s and power requirements up to 16 V, M12 connectors are ideal for industrial IoT applications. They can be used to connect sensors and actuators, and can support fieldbus protocols like PROFIBUS and Ethernet. They can also be used to interface with PLCs and electromechanical systems on the factory floor.
M12 connectors can be mated by tightening a coupling nut on the cable end that is axially locked to the receptacle side. They are also rated to prevent dust, dirt, and water ingress. They are also protected against electromagnetic interference (EMI) and radio-frequency interference (RFI). In addition to a secure connection, M12 connectors are easy to install and offer high-quality performance in harsh environments. They can withstand temperature extremes, radiation, rough handling, chemicals, and fluid ingress.
SMD
M12 connectors are a ubiquitous cable-termination option used in industrial and mobile robot applications. They connect sensors, actuators, and other devices to the controls and systems that run automated machinery. They can be found on a wide range of PUR- or PVC-jacketed cables, and they are able to support a range of protocols, including Profinet and fieldbus. They are characterized by their 12-mm diameter and metric threading, which allows them to fit into matching mating receptacles or coupling nuts.
These connectors are available in a number of variations, including different coding options to prevent mismating. These codings are visually incorporated into the shape of the insulation bodies, making them easy to identify. The top outdoor light cable key position for each coding type matches the pin arrangements on all the other connectors in the same coding type.
HARTING’s M12 connectors and cable assemblies are designed to provide reliable connections in challenging industrial environments. They can withstand temperature extremes, radiation, rough handling, and chemical exposure. They are also waterproof and sealed to resist environmental ingress. Their high-speed data transfer capabilities make them ideal for a range of applications. Their compact size makes them an excellent choice for space-saving devices. In addition to M12 connectors, the company offers a full range of accessories such as splitters, tees, distribution boxes, and V- and Y-cables.
