CAT5e Waterproof Connector
In outdoor industrial applications, you may need to connect Ethernet cables over long distances. In such cases, you need a waterproof connector to prevent water damage and corrosion.
The Iwillink shielded RJ45 waterproof connector is a great option for the job. It has a threaded design, and the collars and ends are sealed by little gaskets to provide IP67 protection.
Waterproof
When you’re running an Ethernet cable over a long distance, it’s important to have a waterproof connector. Otherwise, your connection could short out, and your equipment might get damaged. This is especially true if your cable run runs through an outdoor area. If you don’t have a waterproof connector, the rain or snow might get into your wires and damage them. This can cause a lot of problems, including loss of data and even system crashes.
The Iwillink Shielded Waterproof RJ45 Coupler is a great option for those looking for a durable connector that can stand up to the elements. This coupler has a black plastic housing, and it’s relatively compact, measuring just 4.72 inches in length and 1.1 inches in diameter. It’s also lightweight, at only 3.53 ounces. It also comes in a two- or five-pack, so you can have enough for your entire installation project.
This waterproof coupler has a pretty good IP68 rating, meaning that it’s both dust-proof and submersion-proof. It’s designed to work with any standard CAT5 or CAT6 network cable, and it can be installed quickly and easily. It also features a pass-thru receptacle that can be soldered directly onto equipment.
This waterproof connector has a similar design to the Iwillink model, and it’s also easy to assemble. It features a central Ethernet adapter, along with a pair of collars and end caps that are all sealed by little gaskets. It’s also made of a very durable material, which makes it suitable for harsh industrial or outdoor environments.
Dustproof
If you’re mounting your camera outdoors or in a moisture rich environment, this dustproof connector is an essential addition. It protects the RJ45 connector on your cable from the elements, and ensures that your data transmission is unaffected. The weatherproof connector has a rubber seal that keeps out dust cat5e waterproof connector and other debris. It’s also easy to install, and you can mount it to a flat surface or a wall.
The CAT5e waterproof RJ45 coupler is designed for harsh industrial or outdoor environments. It incorporates a sealed connection directly into equipment and features gasket seals that provide IP67 rated water and dust protection. This coupler has an angled jack for a tight space and is compatible with standard Ethernet patch cords.
There are several steps to installing a CAT5e waterproof RJ45 coupler. First, you need to remove the two end caps and unscrew the coupler housing. Next, you need to feed the wire through the coupler housing and through the grommet. Squeeze the rubber grommet to secure it in place, and then screw the coupler housing back into place.
These waterproof RJ45 couplers have a circular threaded coupling that mounts case side and connects with the cable side connector. They can be used with shielded CAT5e cables that have an outer jacket with a maximum insulated diameter of 0.41″. They also have a drain wire terminal on the bottom of the plug for connecting to foil or drain wire on the cable.
Corrosion Resistant
Ensure your Ethernet network cable stays dry with this waterproof CAT5e connector. The angled RJ45 coupler incorporates a panel mount pass-thru and a jack that solders waterproof connector manufacturer directly to a Printed Circuit Board (PCB). This combination allows you to create a sealed connection that protects against dust, moisture and other contaminants. It’s designed for harsh industrial or outdoor environments with IP67 rated water and dust protection. The angled connector and compact cable gland provide flexibility in tight spaces.
Use this CAT5e Ethernet patch cable to connect a PC or laptop computer to a router, modem, hub or other networking device. It features 4 Unshielded Twisted Pair (UTP) 24 AWG copper wire pairs twisted more tightly than CAT5 cables to reduce electromagnetic interference. The wire pairs are also covered by a durable PVC outer jacket for abrasion and weather resistance.
Easily add RJ45 connections to your equipment with this waterproof CAT5e coupler. It slides on each end of a standard CAT5e Ethernet patch cord to seal it against water and dust. This water-resistant RJ45 coupler is ideal for applications that require a reliable, high-speed connection to your wireless network.
Durable
When you’re using a cable to carry data over long distances in an outdoor environment, you need to ensure it’s durable enough to handle the elements. Otherwise, it could short out and cause serious damage to your equipment. The best waterproof Ethernet connectors are made to withstand the harsh conditions found in industrial and military applications. They have a waterproof rating of IP68, meaning that they’re able to withstand a deep immersion in water for a period of time. They also have a dust-proof rating of IP6.
The first one on our list is the Iwillink Shielded Waterproof RJ45 Coupler. It features a sturdy design that’s easy to install. It’s also designed to resist cold temperatures, so it won’t crack in winter.
This coupler has a cylindrical design and fat end caps. It has a plastic housing and a zinc alloy fastening ring. It’s ideal for use in rough environments, such as law enforcement field work and oil rigs. The plastic is also very tough, so it won’t easily be damaged in an accident.
It’s a pass-thru coupler with a female case side panel mount that solders directly to a jack. It also has a compact cable gland that fits in confined spaces. This assembly is suitable for outdoor and harsh industrial applications, and it provides full protection against water, dust, oil, and UV radiation.
