12 Volt 2 Pin Waterproof Connector
Suitable for all car, bike, truck, boat and marine wire connections. Features a vinyl opening cap and mounting screws. It is made from environmentally friendly materials and meets strict UL standards.
TE Connectivity’s eco|mate waterproof connectors reduce system complexity and installation costs in harsh-environment wire-to-board and wire-to-wire applications with exposure to high humidity. They include rugged press-to-release spring latches that prevent accidental unmating and preassembled rubber seals.
Suitable for a wide range of applications
This waterproof connector is ideal for a wide range of applications that require a watertight connection. Its series of internal compression gaskets and o-rings compress to seal around the cable as it exits the connector. This prevents rainwater from getting into the connection, ensuring a completely waterproof seal. The connector is also easy to assemble. It only requires a soldering iron and wire cutters to complete the installation. It is suitable for round section, twin-core cables of 5.5 – 12mm in diameter.
The connector is made of PA66 nylon and 14AWG tinned copper wire, so it can withstand extreme temperatures. The thick tinned copper barrel ensures that the connector won’t crack when you crimp it. The terminals are also nickel plated to help protect against corrosion. This 12 volt 2 pin waterproof connector connector is suitable for a variety of automotive, motorcycle, marine, and other applications.
This waterproof two pin polarized connector is perfect for any weather exposed application. It is ideal for marine applications, solar panel connections, and other weather exposed electrical connections. The connector has rubber seals on all connections and mount, making it a durable option for any application. It is protected front and back, and can be mounted in a panel up to 1-1/4″ thick. It can be used at voltages up to 12V and has a maximum current rating of 20A.
Waterproof
Many electrical connectors must operate in harsh environments, where moisture can lead to corrosion and other problems. This type of environment is particularly challenging for waterproof electrical connectors, which must be able to provide a seal that keeps water from getting into the connector. These conditions can include humidity, rain, and snow, as well as pressurized water used for cleaning purposes.
Waterproof connectors can be made of either metal or plastic. The metal version is preferred for marine applications, and the plastic version is recommended for automotive, industrial, and outdoor use. Metal waterproof connectors are typically rated for a greater number of mating cycles and a higher contact resistance. They also offer better vibration and shock resistance than plastic versions.
Despite the challenges, there are still plenty of uses for waterproof connectors. In fact, the demand for waterproof connections is growing rapidly in a wide range of industries. These industries include marine technology, automotive, aviation, and data communication installations. Waterproof connectors can help to improve the reliability of these technologies and avoid costly interruptions due to corrosive environments.
Whether you are installing a new system or maintaining an existing one, a waterproof connector can make your life easier. They can be used for a variety of applications, including automotive, military, and commercial electronics. The waterproof design makes them ideal for harsh environments, and they are easy to install.
Durable
The waterproof connector is made of a rugged body and copper contact pins that provide low resistance connections. The plug mates with the socket via a twist-lock action and internal gaskets compress to produce a watertight seal between the mating components. It has a cable gland for round section twin-core cables up to 12mm in diameter and the solder contacts can accept conductors of up to 4mm2 cross-section. The male connector portion has a vinyl cover that keeps the terminals closed when not in use and the female panel connector part has a tight fitting open vinyl cap when mounted in the enclosure.
The electrical snap connector allows you to replace a traditional wire connection with a waterproof one, and it is easy to install. This connector is also more standardized and safer than using electrical 4 pin panel mount connector tape to connect your wires. It is ideal for PV inverters, medical equipment, interactive smart grid, automation machine, marine device, and automotive devices.
The waterproof connector is compatible with most cigarette lighters, and the locking tabs make it secure. You can mount it in the panel of your car, truck, motorcycle, or boat.
Easy to install
In comparison to pipe-and-wire installations, pluggable connectors allow significant time savings and flexibility. They also provide water ingress protection. This feature is important, as many electrical systems are susceptible to moisture and corrosion. Waterproof electrical connectors are designed to withstand a wide range of environmental conditions, including high temperatures and pressures. They also offer a number of other features that make them more durable than standard connectors.
Waterproof connectors are ideal for use in marine, automotive, and industrial settings. They are also suitable for solar panel connections, outdoor lighting, and other applications where the connections will be exposed to the elements. Waterproof electrical connectors are also available in a variety of pin counts, power ratings, and dimensions. They can also be mate with a variety of different plugs and sockets.
These waterproof electrical connectors are made of plastic or metal and can withstand harsh environments. They have rubber seals that prevent water from entering the socket, and they can be soldered or crimped to wires. They have a small footprint, making them ideal for space-limited applications. They are often used in combination with a panel mount to ensure the connectors are protected from moisture and weather. A tethered cap on both the male and female connector parts covers the terminals when not in use. A packing nut on the back of the male connector portion allows it to be sealed in place.
